How many classes a week a hundred-member gym needs
Most timetables grew one class at a time, and nobody ever ran the division backwards. Here it is, on your own attendance, with the fill figures the software keeps for each class.
Running a gym 3 November 2026 7 min read
The short answer
Count seats, not classes. Take the attendance you actually recorded last month, divide it by 4.3 for a normal week, then divide that by the number of people you want on the mat at once. The result is how many sessions your week needs. A hundred members is not the input. The visits those hundred people make is.
Two gyms with the same hundred members can need eleven sessions and twenty-six. The gap is how often people come and how many you will teach together, and both are yours to measure rather than to copy. Here is the arithmetic, then what the software can and cannot tell you about it.
Class scheduling and booking
The arithmetic, on your numbers
- Get last month's attendance. Reports has an Attendance button that exports the period on screen, one line per attended booking, with the date, the member and the class.
- Turn it into a week. Divide by 4.3. Use attendance and not bookings: someone who books and does not come does not need a seat, they need a different conversation.
- Pick your number on the mat. Not your maximum. The number where the coach still corrects people by name, which in most rooms is well under the fire limit.
- Divide, then subtract reality. Weekly visits over that number is your session count. Take out what one coach and one room cannot physically hold, and what is left is the timetable to build.
Run that before you add anything. Most schedules grow one class at a time, each one answering one member's request, and nobody ever runs the division backwards to see what the week has become.
If the attendance figure comes back impossibly low, check who is marking people present before you rebuild anything. An empty register makes a busy gym look dead, and every number below rests on that one habit.
What the software tells you, class by class
Open a session in the schedule and there is a Stats tab, built from real bookings. Four numbers sit there and each counts something different, which is exactly where people misread them:
| Number | Where | What it actually counts |
|---|---|---|
| Occupancy, 12/16 | Head of the session | Bookings on that date against that session's seats. Amber at 80%, red when full. |
| Fill rate | Stats tab | Average across past dates of bookings divided by the seats the class carries today. |
| Attendance rate | Stats tab | Share of those bookings that were checked in. |
| No-show | Stats, Benchmarks | 100 minus the attendance rate. In a gym where nobody checks in, it reads 100%. |
| Returning | Stats, Benchmarks | Share of the people who have booked this class at least twice. |
Two consequences. The fill rate divides by today's capacity, so cutting a class from 20 seats to 12 rewrites every past percentage upward without a single extra person walking in. And the no-show tile is only as honest as your check‑in habit, which is worth remembering before you take it to a coach.
What does not exist: a table of all your classes ranked by fill. You open them one at a time. The Classes page lists the seats a class offers rather than how full it gets, because a class is a template and fill belongs to a date. Reports gives one attendance total and a trend line for the whole gym, never a split by class. So the monthly pass is a handful of drawers opened in a row, worst slot first.
Building the week in one save
The class form takes a set, not a single slot. Leave Repeats on every week, tick the days, list the times, and every day times every time becomes a session. Four days and two times is eight classes in one save, and the form tells you the count before you press it. Switch to One-off and the same form takes a single date instead, for a seminar or a guest coach.
The rest of that form is what decides fill:
- Duration. A new class starts at 60 minutes.
- Capacity, 1 to 60 seats. A new class starts at 20, and that is a default worth changing before you build the week rather than after.
- Turnaround after, the dead time before the room is free again. It counts as occupied, which is the point.
Two settings frame the grid before you put anything in it: the day your week starts, Monday unless you switch it to Sunday, and the hours the schedule draws, 06:00 to 22:00 out of the box. Neither changes what members can book. They decide what you look at every morning, which over a year is not nothing. Both live with the rest of the booking and scheduling settings.
A studio that sells slots rather than classes gets a different form: opening time, closing time, and the software derives the grid, one slot every duration plus turnaround, capped at 40 slots a day. Treat that cap as a warning rather than an obstacle. A day past forty lines is a day nobody will ever proofread.
The cap is the lever, not the number of classes
Nine people in a room with twenty seats reads as a failure on every screen you own. The same nine in a twelve-seat room reads as full, forms a waitlist, and makes an early cancellation worth something. Nothing changed in the room.
Two settings sit under that. Overbooking is off by default, so full genuinely stops the booking. The automatic waitlist is on, so the first person in line takes a freed seat with nobody at the desk. That pair is most of what any software can do about people who book and do not come, and it only works if the seat frees early enough for someone to read the message.
On the day itself, the head of a session carries four counters: occupancy against the seats, how many people are already present, the average attendance of that class, and the length of the waitlist. That last one is the number to watch for a fortnight before you add anything to the week. A waitlist that never forms means the cap is not what is holding you back.
When one date is different, edit the session rather than the class. A session carries its own capacity and its own coach for that date only, and the waitlist reads the session's number rather than the class's. A January Tuesday at 24 seats does not have to become your permanent 24.
Cutting a slot without losing the people in it
Three ways to take a class off the week, and only two are safe.
- Cancel the session, for one date. Everyone booked is told, by email and by LINE, and reopening it later is one click that tells them again. This one does not read the per-message channel switches: it has its own setting, Class cancelled by you, in SettingsClasses, and it is on unless you turn it off. That is deliberate. Turning off the confirmation a member gets for their own cancellation says nothing about whether they should hear that you cancelled the class.
- Add a closure for a whole day, which tells every active member the gym is shut that day.
- Delete the class, which takes its bookings with it, past ones included, so the attendance history of that slot goes with it. It lands in the trash rather than vanishing, and the retention there is 30 days out of the box, so you have a month to put it back. Still the wrong tool for a class that has already run: if a format is finished, stop scheduling it.
What a timetable cannot fix
- A slot nobody wants at any capacity. If the 6am sits at five booked and three on the mat all quarter, the hour is wrong or the format is. Cutting the cap makes the bar look better and changes nothing else.
- Two classes competing for the same twelve people. Splitting a full class in two usually gives you two half-empty ones. Merge before you split, and split only when a waitlist has existed for a month.
- A coach change. Attendance follows people. When someone leaves the mat, watch that slot's numbers for a month before you conclude anything about the hour.
- Counting what nobody records. Every figure on this page comes from check-ins. Marking attendance is the input; the schedule is the output.
Do the division once a quarter and you will change your week two or three times a year, which is roughly the right rate. Nothing in the software will prompt you to do it.
Class scheduling and booking
Keep reading
More guides
Running a gym 1 November 2026
Gym automation: the 7 messages every gym should send
The seven automated messages that keep a gym full: booking confirmation, class reminder, welcome, inactivity nudge, renewal, birthday and win-back. Timing, channel and examples.
Running a gym 1 November 2026
How to turn gym leads into paying members
A simple system to convert gym leads: answer fast, book a real trial date, follow up three times in a week, and measure where people drop. With message examples.
Running a gym 22 September 2026
Running your gym on the days you are not in the room
Two switches ship off and one ships on, which is the part owners get wrong. Ten minutes in Settings, and one asymmetry most people miss.